Getting Started with Fabber Cloud
Step 1:
Get the software you need.
You’re going to need SketchUp version 2017 or later (Make or Pro). If you don’t already have SketchUp you can get it the free 2017 version in your account by clicking on downloads.
Once you get SketchUp setup you need our extension, which you can download right here. The video will show you how to set it up.
Step 2:
Make something!
You can use our pre-built library of models, or you can create your own. Let’s start with using some our prebuilt models which you can find here.
To preview code right in your browser you can use NCViewer
If you want to test on your own machine, but you don’t see it in the list you can setup your machine by following this video:
If you don’t see the machine you have listed, you can submit it here.
Step 3:
Creating your own models in SketchUp is easy!
Feedback! We need your feedback. Is something working great? Is it broken? Do you not understand something? Post in our forums here
Getting Started with Vectric
Step 1:
Get the software you need.
You’re going to need SketchUp version 2017 or later (Make or Pro). If you don’t already have SketchUp you can get it the free 2017 version in your account by clicking on downloads.
Once you get SketchUp setup you need our extension, which you can download right here. The video will show you how to set it up. If you’re on Windows or a Mac with Parralells/VM ware follow this:
If you want to use Fabber SVG on a Mac, follow these steps (note that any user that’s purchased fabber get’s access to BOTH the Mac and PC versions
Step 2:
Make something!
You can use our pre-built library of models, or you can create your own. Let’s start with using some our prebuilt models which you can find here.